Why does the letter E appear on the Tonometer?

Blood pressure is a kind of indicator. It shows the state of a person’s heart at the moment. It is not permissible to draw conclusions about health based only on the tonometer readings, but the readings of the device can give a signal if the heart begins to malfunction. And this means it’s time to contact a specialist. The device readings are encrypted into a special symbol system. Knowing what the numbers on a blood pressure monitor mean, you can prevent many serious conditions.

SYS and DIA numbers

Two numbers located one below the other indicate systolic and diastolic pressure. The first is measured during the ejection of blood or contraction of the heart muscle, and the second while it is relaxed. DIA (diastole) indicates the level of lower pressure, and SYS (systole) indicates the upper pressure.

Systole and diastole indicators on a tonometer

The normal rate is 135/85. Having seen such tonometer readings on the display, which mean the absence of hypertension and hypotension, you don’t have to worry about your health. For a more accurate result, it is better to take a measurement first on one hand and then on the other and calculate the arithmetic average of the two indicators.

Another significant factor is the difference between the upper and lower indicators. If the measurements show a difference much less or more than 50, then the user should report this fact to the attending physician.

A state of rest during diagnostics will help to avoid errors in the device readings. It is prohibited to speak or move until data appears on the device display.

The automatic tonometer responds to the following factors:

The sensitive sensor even reacts to air movement. You must behave calmly, not talk, keep your back straight. The tonometer cuff attached to the arm should be at the level of the heart. If you remove all interference and follow the instructions, the result will be correct. If you need to get a more accurate result, you can take measurements three times with the necessary break between them. After this, it is important to derive the arithmetic average. We must remember: the first indicator and the last may differ due to the artery getting used to compression or any involuntary movement, so triple measurements will provide more accurate data. We must remember that a decrease, as well as an increase in pressure beyond the normal range, is an alarm signal. It is necessary to find out the cause by contacting a cardiologist.

Very often, tonometers may not produce results at all or show incorrect results, as well as show different pressures for various technical reasons: they forgot to insert the batteries; the device is not used correctly; low-quality batteries that quickly fail. In order for electronic blood pressure monitors to work well, it is necessary to change the batteries on time. It is advisable to use only ALKALINE LR batteries for blood pressure monitors. They are more energy-intensive and guarantee a long service life, which is from 200 to 400 measurement cycles. Here, the word cycle means 2 – 3 times a day. Regardless of the manufacturer, LR batteries will ensure the operation of the tonometer for 4 – 6 months. When the tonometer is turned on, the display is tested, and if the device shows a symbol that indicates insufficient power, this means that the batteries are running low - it’s time to take care of new batteries. In addition to errors associated with measuring blood pressure with a device and technical reasons, different pressures can be completely physiological. It is worth remembering that active movements, stress, even sneezing and coughing increase blood pressure. This is a natural reaction and does not require medication. Blood pressure increases for a short time, and if you repeat the measurements a little later, the values ​​​​will decrease significantly.

Heart rate

The third digit located on the device display is the pulse. This figure is located in the bottom row under the pressure indicators.

Heart rate indicator

It is not difficult to understand what this or that number located on various models of tonometers for measuring pressure means. Heart rate depends on the age and gender of a person; on average, this indicator varies from 60 to 90 beats in 60 seconds. A rarer pulse may indicate bradycardia, a more frequent pulse may indicate tachycardia.

Arrhythmia indicator

The arrhythmia indicator is an icon located on the device display. As a rule, it is located at the very bottom of the screen, closer to the center. Depending on the make and model of the device, the appearance of the icon can vary significantly, but most often this symbol looks like a flashing heart.

The icon lights up if the heart rhythm is uneven. This may indicate both the arrhythmia of the human heart and interference that arose during the measurement.

In order to exclude a random factor, you need to repeat the procedure after a few minutes. If, during three repetitions performed while the patient is at rest, an arrhythmia icon appears on the display, the user should report this fact to the therapist or cardiologist as soon as possible.

Graphic blood pressure level indicator

It can be difficult for an elderly person to keep a few numbers in mind and remember what normal blood pressure should be. For such people, as well as for greater clarity, many tonometer models have a graphic indicator of the blood pressure level.

Graphic blood pressure level indicator

All manufacturers position the scale differently. For some brands it is located on the body, while for others it is on the display. Figure 3 shows a tonometer with a scale placed on the body. A slider on the screen is displayed next to the danger level. The position of the slider in the green zone means that the indicator is within the normal range; if the slider is in the red zone, you should consult a therapist or cardiologist.

The letter e on the omron tonometer

Blood pressure is a kind of indicator. It shows the state of a person’s heart at the moment.

It is not permissible to draw conclusions about health based only on the tonometer readings, but the readings of the device can give a signal if the heart begins to malfunction. And this means it's time to contact a specialist.

The device readings are encrypted into a special symbol system. Knowing what the numbers on a blood pressure monitor mean, you can prevent many serious conditions.

High pressure indicator

Deviation of blood pressure readings from the norm is a serious signal that may indicate heart disease. And the treatment of such diseases must be approached without delay. That is why on the displays of some tonometer models there is an additional icon that signals high blood pressure.

Tonometer with high pressure indicator

Factors that may cause your blood pressure to rise

Some factors cause a temporary increase in blood pressure:

• Stress

  . Hormones that are released in the body in stressful situations cause vasoconstriction and make the heart work harder.

• Smoking

  . After each cigarette you smoke, your blood pressure rises for at least a few minutes.

• Cold

  . When a person is in the cold, his blood vessels contract to prevent heat loss. Therefore, you should not take measurements if you have just come home from the cold.

• Physical exercise

  . Sports exercises and physical work increase the body's need for oxygen, so the respiratory and cardiovascular systems begin to work more intensely.

• Coffee

  . The caffeine it contains makes the heart beat faster and stronger.

• Medicines . Some medications increase blood pressure, others decrease it.

If you want to get accurate readings from the tonometer, these effects should be eliminated as much as possible.

Motion indicator

On some tonometer models there is a motion indicator on the display. As a rule, it depicts a human figure.

Movements while using the device can cause the device to display incorrect data, which in turn will lead to an error in diagnosis. The appearance of a motion icon on the device screen encourages the user to assume a state of rest and take the measurement again.

Indicator of correct cuff fixation

Example of correct cuff attachment

To avoid this factor, the display of many tonometers includes an icon for correct cuff fixation.

Indicator of correct cuff fixation

For the manufacturer OMRON, this icon looks like the abbreviation OK enclosed in a circle. The presence of an active symbol indicates correct fixation of the cuff.

What do the numbers on the blood pressure monitor mean?

After measuring the pressure, numbers are displayed on the tonometer screen - indicators of pressure (upper/systological and lower/diastolic) and heart rate. All home blood pressure monitors have the same sequence of this data, regardless of the manufacturer.

Let us recall the norms of pressure and heart rate indicators with age correlation.

Heart rate - pulse

To obtain correct data, the pressure is measured three times on one arm with an interval of one minute. Some modern tonometers have the function of independently determining the average value calculated from three pressure measurements.

When measuring pressure, it is important to follow the rules:

1. The wrist tonometer is worn at a distance of 1 finger from the hand.
2. The Velcro strap is fixed so that there is no pinching of the hand.

• The cuff tonometer is attached to the arm at a distance of two fingers from the elbow bend so that the elastic tube passes through the center of the palmar surface of the hand;
• During the measurement, you must sit at a table - your hand should lie on a flat surface in a relaxed state, and the cuff should be at heart level.
• The cuff is secured with Velcro without squeezing or excessive loose space.

While measuring blood pressure, after pressing the button, it is forbidden to talk, move, move your arms, or clench your fists. Feet are on the floor; you cannot cross your legs.

Pressure is not a constant value. In a healthy person, blood pressure readings can vary by 5-10 mm. Hg with each heartbeat, which will be detected by the tonometer during several successive measurements. This error is considered normal. This is why triple measurement and the average is considered the most accurate result.

Common reasons for different indications:

• Neglect of rest
• Heart rhythm disturbance
• Measuring pressure on different hands
• Measuring pressure with different devices
• Short interval pressure measurement

Classification of blood pressure values ​​Table for classification of blood pressure values ​​(unit: mmHg) according to the European Society of Hypertension (ESH)

If you measure your blood pressure immediately after physical activity or psychological stress (for example, an emotional conversation), the result will be higher than the true readings. Subsequent measurements will give a lower result. To obtain correct data, you should rest for at least 15 minutes before the measurement procedure.

• Heart rhythm disturbance

Arrhythmia can also cause incorrect results. The patient may not even realize that he has this disorder. Therefore, when choosing a home blood pressure monitor, you should pay attention to models with an arrhythmia indicator. For example, tonometers from the Swiss brand B.Well have this function.

• Measuring pressure on different hands

Quite often (in 50-60% of cases) the pressure on different hands can actually vary and this can be both a physiological feature and a pathology. If your pressure is different on different hands, you should pay attention to the following indicators:

• If the difference range is more than 10 mmHg.
• If the pressure on one hand is normal (or above normal), and on the other hand it is below normal.
• If there are also additional complaints or alarming symptoms from the cardiovascular system.

These factors indicate that you should pay attention to your condition and tell your therapist about your observations. Most likely, you will be prescribed a series of examinations: a cardiologist, a vascular surgeon, a neurologist. If the difference in readings is no more than 10 units, then there is most likely no reason for concern. Such symptoms are common to more than half of the people on Earth. The pressure should be measured on the arm where the readings are higher.

• Measuring pressure with different devices

An automatic tonometer is not inferior in accuracy to a mechanical one, but even vice versa. The result of measuring blood pressure obtained by the traditional Korotkoff method may be inaccurate for many reasons: subjectivity of the measurement procedure, the “infinite tone” phenomenon, low qualifications of medical staff, poor coordination of the “hands-vision-hearing” system and others. Thus, the situation with the credibility of these testimonies is ambiguous.[1] The automatic tonometer is devoid of the “human factor” and does not round the results. You just need to choose a high-quality tonometer. For example, all B.Well brand blood pressure monitors are developed in Switzerland, where testing and quality control are carried out. In addition, the devices have undergone clinical trials and are recommended for use by the Russian Society of Cardiology.

• Short interval pressure measurement

To obtain the most accurate result, doctors recommend taking 3 consecutive measurements, but a certain interval must be maintained between them so that the blood vessels return to normal after the previous measurement. A very convenient function of automatic 3-fold measurement 3chek is available in the B.Well MED-55 tonometer. The device itself will make 3 consecutive measurements at the required interval, and then produce a result calculated using an intelligent algorithm.

Controlling your blood pressure is very important. Imagine, today about a billion people suffer from hypertension. 40 years ago the numbers were almost half that. [2]

[1] Issues of accuracy of blood pressure measurement using the oscillometric method. Kishov R.M., Magomedov A.M.

[2] World Health Day: Reduce the risk of heart attack and stroke - monitor your blood pressure Electronic resource // WHO Media Center - 04/03/2013.

Share this article with your friends

Designations on tonometers in the form of indicators on the screen

Different device models may have additional indicator icons that indicate health problems or measurement errors.

What does the arrhythmia indicator look like on a tonometer??

Some models of pressure measuring devices are equipped with an arrhythmia sensor. During the measurement process, the device notes the irregularity of the heartbeat; if the indicator appears frequently, you should consult a cardiologist.

In some cases, arrhythmia may interfere with the correctness of the measurement, then no data is displayed on the screen or an indicator with a heart appears (double or in quotation marks) - in this case, it is necessary to repeat the measurement.

• High blood pressure indicator in the tonometer

When the pressure rises above normal, an indicator appears on the monitor. In tonometers for home use, high blood pressure starts at 135/85.

• Pressure level scale

Next to the numbers indicating the current pressure there is a scale divided into three parts: the middle scale/yellow is normal, the lower/green is low pressure, the upper/red is high.

• Motion indicator on the tonometer

This icon appears if there were hand or body movements during the process. In some devices that do not have an indicator icon, the message “error/err” appears.

• The indicator on the tonometer flashes - crossed out battery

This is how the device indicates that it is time to replace the batteries.

When choosing measuring instruments for home use, it is best to give preference to trusted manufacturers. Many devices of unknown origin have serious disadvantages - inaccurate results and short service life. The Omron R2 tonometer has passed all the necessary quality tests and has the appropriate certificates. The compact measuring device will be a good helper for people who need constant monitoring of blood pressure and pulse both at home and while traveling.

How it works?

The principle of operation of the mechanism is as follows: a person measures pressure in the usual way, and the device analyzes pulse waves or oscillations (depending on the device). If cardiac activity is rhythmic, the measurement result is immediately displayed on the screen. In case of irregular heartbeat (extrasystole, blockade, atrial fibrillation and other pathologies), a special symbol appears. The icon of the arrhythmia that has occurred on the tonometer looks like this in most cases:

If the indicator is triggered, it is worth repeating the measurement.

Against the background of arrhythmia, the measurement can be reliable or unreliable. A reliable indicator is displayed on the monitor along with an arrhythmia indicator, and if the data received is unreliable, the result is not displayed.

The symbol “E” (Error) appears on the display if the electronic tonometer cannot distinguish the pulse wave and estimate the pressure (when the heart contracts ineffectively, which occurs with atrial flutter and fibrillation). However, many modern blood pressure monitors have built-in software that can detect atrial fibrillation. For example, AFIB technology from Microlife, Duo Sensor from Paul Hartmann and others.

The diagnostic value of the arrhythmia indicator is high, especially in elderly people suffering from coronary heart disease.

Characteristics and components of Omron R2

The fully automatic device has a modern design, compact dimensions and a set of many useful functions. The tonometer is designed to measure pulse and blood pressure.

The compact and lightweight Ormon r2 tonometer will accurately measure pressure anywhere

The cuff is anatomical, made using a unique technology. Suitable for wrists with a circumference from 13.5 to 21.5 cm. Manufacturer's warranty - 60 months. The full technical characteristics and equipment of the tonometer can be found in the table:

What else do you need to remember?

Try to always measure your blood pressure at the same time. It is better to do this at least twice a day: morning and evening. The measurement must be carried out three times in a row with short breaks. If you get different numbers, the smallest one should be considered correct.

Monitoring blood pressure over time is more informative than a single measurement. When the doctor takes your blood pressure in the office, you may have just come in from the cold, or you may have been nervous while standing in line outside the office. If you keep a notebook in which you record the tonometer readings every day, you get a more objective picture.

Error correction

Errors may occur when using the tonometer. Some of them you can fix yourself. If this does not work for some reason, disassembling the device yourself is highly not recommended.

No one is safe from mistakes, not even a tonometer

Firstly, without knowledge of the features of this device, you can only aggravate the situation. Secondly, after opening the tonometer and damaging the factory seals, the free warranty period of service is automatically canceled.

The table shows the most common errors and methods for eliminating them.

1. The cuff is not fastened correctly.

2. The hand with the device is not at heart level.

3. There were movements or conversations during measurements.

4. The arm is overextended.

Top 5 most common malfunctions of tonometers

Hello everyone! I continue to summarize and post in a condensed form my experience in electronics repair.

I present my Top 10 most common malfunctions of tonometers, which was born as a result of accidental repairs of medical equipment and communication with other Masters.

I won’t say that I’m a great specialist in this area, but I came across some things and successfully fixed them. Let's start the rating. The locations of malfunctions of tonometers and blood pressure meters are sorted by the frequency of occurrence of the malfunction.

How to disassemble the ANDUB-403 automatic wrist blood pressure monitor

When turned on, this blood pressure meter shows zero.

Then the cuff is inflated, but it is interrupted and the Err Cuf error appears on the display.

We turn the AND UB-403 tonometer sideways and see a plug that needs to be removed by prying it off with a thin slotted screwdriver or an awl.

On the other side of the case, remove the same plug.

This is what these cuff mounting plugs look like.

After this, we remove the cuff of the AND UB-403 tonometer and see the connection points of the pipes from the compressor to the cuff - there are two of them.

In these places, desealing and air leakage may occur, so we carefully inspect and clean the rubber seals of the tonometer pipes and cuff.

Let's try to put everything back together in reverse order.

If the cuff error remains, you need to check the cuff itself for cracks. This is usually done visually.

The rubber cuff of the blood pressure monitor can be repaired by gluing a patch to the air leak. To learn how to patch and repair a cuff, see the video below using the example of a Microlife tonometer cuff.

Storage and care

If you do not adhere to the rules for storing and caring for the tonometer, then the device is unlikely to last long. The more carefully you follow all recommended measures, the longer the measuring device will last.

1. Do not expose the tonometer to impacts, falls or direct sunlight for a long time.
2. Do not immerse the device in water or give it to children.
3. If the tonometer is not used for a long time, the batteries must be removed from it.
4. To avoid damaging the monitor and cuff, store the device in a special case.

To keep the device safe, store it in the case that comes with the kit.

If the device or cuff is dirty, do not use alcohol-based products, solvents, alkaline liquids, etc. for cleaning. It is best to wipe the monitor and cuff with a soft cloth (or slightly damp).

When choosing measuring instruments for home use, it is best to give preference to trusted manufacturers. Many devices of unknown origin have serious disadvantages - inaccurate results and short service life. The Omron R2 tonometer has passed all the necessary quality tests and has the appropriate certificates. The compact measuring device will be a good helper for people who need constant monitoring of blood pressure and pulse both at home and while traveling.

Characteristics and components of Omron R2

The fully automatic device has a modern design, compact dimensions and a set of many useful functions. The tonometer is designed to measure pulse and blood pressure.

The compact and lightweight Ormon r2 tonometer will accurately measure pressure anywhere

The cuff is anatomical, made using a unique technology. Suitable for wrists with a circumference from 13.5 to 21.5 cm. Manufacturer's warranty - 60 months. The full technical characteristics and equipment of the tonometer can be found in the table:

Why does the letter e appear on the tonometer?

Hello everyone! I continue to summarize and post in a condensed form my experience in electronics repair.

I present my Top 10 most common malfunctions of tonometers, which was born as a result of accidental repairs of medical equipment and communication with other Masters.

I won’t say that I’m a great specialist in this area, but I came across some things and successfully fixed them. Let's start the rating. The locations of malfunctions of tonometers and blood pressure meters are sorted by the frequency of occurrence of the malfunction.

1st place – loss of tightness of the tonometer cuff

If there is a loss of tightness in the pressure circuit in your tonometer, then with a high probability the “Err Cuf” error will appear on the screen of the automatic tonometer. Translated from English, cuff means cuff, so it is logical that the Err Cuf error is an error in the tightness of the cuff.

If your tonometer gives such an error, then first of all you need to check the connections between the cuff and the compressor. To do this, you need to remove the cuff. Let's look at how to do this using the AND UB-403 wrist tonometer as an example.

How to disassemble the automatic wrist blood pressure monitorANDUB-403

When turned on, this blood pressure meter shows zero.

Then the cuff is inflated, but it is interrupted and the Err Cuf error appears on the display.

We turn the AND UB-403 tonometer sideways and see a plug that needs to be removed by prying it off with a thin slotted screwdriver or an awl.

On the other side of the case, remove the same plug.

This is what these cuff mounting plugs look like.

After this, we remove the cuff of the AND UB-403 tonometer and see the connection points of the pipes from the compressor to the cuff - there are two of them.

In these places, desealing and air leakage may occur, so we carefully inspect and clean the rubber seals of the tonometer pipes and cuff.

Let's try to put everything back together in reverse order.

If the cuff error remains, you need to check the cuff itself for cracks. This is usually done visually.

The rubber cuff of the blood pressure monitor can be repaired by gluing a patch to the air leak. To learn how to patch and repair a cuff, see the video below using the example of a Microlife tonometer cuff.

How to seal a tonometer pad

It happens that the air supply becomes unsealed inside the device. In this case, you will have to disassemble the tonometer and eliminate microcracks or change dried rubber bands.

If you do not understand how to disassemble the tonometer, then I advise you to watch the following video on how to properly disassemble AND UB 201 .

2nd place – segments of numbers on the tonometer display disappear

Another part of the disease is the detachment of the cable of the LCD screens of tonometers, as a result of which segments of numbers and letters may not be displayed on the display.

To repair such a malfunction, you will have to disassemble the blood pressure meter again and repair the cable contacts. I analyzed cases of cable detachment and repair of such cases for TVs and monitors in an earlier article.

The tonometer display cables are glued using the same principle. Repair is made easier due to the nice size and pitch of the cable contacts. Repairing such cables is much easier than in TVs.

After disassembling the tonometer, you can glue the display cable back by uniform heating using a hot air gun or a soldering iron with a special attachment for repairing cables. Watch the video on this topic - very informative and interesting.

3rd place – the tonometer buttons do not work

In automatic and semi-automatic tonometers, operation is controlled using tact buttons. These buttons do not last forever and eventually fail - they do not press, they dangle, they press without a click, they press with a click, but without any result.

If the tonometer button is faulty, you have to disassemble the device, disconnect the electronic board, unsolder the old one and solder in a new button. In principle, nothing complicated, you just need to choose exactly the same button, because there are a great variety of seats, shapes and sizes of buttons.

For an example of common buttons, see the video on disassembling and replacing a tonometer button.

4th place – the tonometer does not measure blood pressure correctly

Before talking about the fact that the tonometer does not measure pressure correctly, it is necessary to determine the measurement errors and the factors that increase them.

Everyone knows that the vast majority of modern blood pressure meters work using the N.S. tone method.

Korotkov, which was even recognized as officially recommended by the World Health Organization.

This indirect measurement method has some error, determined by the elasticity of the walls of the arteries and soft tissues, the amplitude and shape of the pulse wave, and other factors that are different for each person.

If we abandon rounding and accurately use the division value of the pressure gauge, we will see the difference between adjacent measurements and when using a mechanical tonometer. Numerous experiments have shown that the error of N. S. Korotkov’s tone method is usually within the range of ±5-7 mm Hg. Art.

The error of manual tonometers consists of three components: the error of the method, the accuracy of the pressure gauge and errors in determining the moment of reading the readings. It turns out that the error in measuring blood pressure can reach up to 15 mm Hg. Art . This must be taken into account before taking medications to normalize blood pressure.

To be confident in the tonometer readings, metrologists and doctors advise taking several measurements with a break between them of at least 3-5 minutes. In approximately this time, the cross-sectional diameter of the vessels is restored, which helps to increase the accuracy of measurements.

From an electronics point of view, of course, there may also be reasons for an increase in measurement error. The pressure sensor and microcontroller are responsible for this. Less commonly, there may be problems with the firmware and supply voltage.

5th place – malfunction of the tonometer electronics

Before repairing the tonometer, you must carefully inspect the printed circuit board for microcracks and poor soldering. Solder suspicious areas, and check suspicious radio elements or replace them with similar ones.

Source: https://planshet-info.ru/kompjutery/pochemu-na-tonometre-vysvechivaetsja-bukva-e

Error correction

Errors may occur when using the tonometer. Some of them you can fix yourself. If this does not work for some reason, disassembling the device yourself is highly not recommended.

No one is safe from mistakes, not even a tonometer

Firstly, without knowledge of the features of this device, you can only aggravate the situation. Secondly, after opening the tonometer and damaging the factory seals, the free warranty period of service is automatically canceled.

The table shows the most common errors and methods for eliminating them.

1. The cuff is not fastened correctly.

2. The hand with the device is not at heart level.

3. There were movements or conversations during measurements.

4. The arm is overextended.

Correct pressure measurement

To measure blood pressure, you need to put a special cuff on your arm.

It should be 1-2 centimeters above the inner bend of the elbow. The cuff must fit the person in size. It shouldn’t put too much pressure on your hand, but it shouldn’t “hang” on it either. After this, the air is pumped with a special rubber bulb, independently or with outside help. After this, the pressure will be known.

Enter your pressure

Avoiding errors in readings when measuring pressure

Sometimes the tonometer can give incorrect data, so you should always monitor its accuracy. First of all, you need to know that there are several types of devices:

• Mechanical tonometer. It is more difficult for them to measure pressure - this should be done by a doctor or a person with very good vision and hearing, who can accurately recognize the pulse in the headphones and the desired indicator on the dial.
• Electronic or automatic blood pressure monitor. This is a modern device that everyone can use - you just need to use it correctly and it will display the pressure on the screen.

It is impossible to say which of these devices is more accurate. If used correctly, they will both show the correct indicator. But in both cases errors are possible. An electronic device will most likely malfunction if the battery charge is low. It is also impossible to obtain the correct result if the bulb, electronic unit or cuff is faulty. Calibration of the mechanical apparatus is also necessary. To avoid mistakes, before measuring blood pressure, you should refrain from drinking alcohol, coffee and strong tea, smoking, and physical activity. You cannot talk or take your pulse when you are nervous. To obtain accurate readings, it is better to measure your pulse in the morning and evening three times, with breaks of 5-10 minutes. The lowest number will be the most accurate.